Multi Area View; Setting And Unsetting The System - Siemens SPCK620 User Manual

Multi area view

6

Setting and unsetting the system

6 Multi area view
6.1
18
Siemens AB
Security Products
Setting and unsetting the system
Enter a valid User code

 The names of the area groups are displayed.
 The current state of the area group is indicated on the right in the display
and by the LEDs above the display.
 Following states are possible:
Symbol Function
Fullset (all aras of the area group are Fullset)
Unset (all aras of the area group are Unset)
Mixed set (the areas of the area group have different setting states.).
Partset A (all aras of the area group are Partset A)
Partset B (all aras of the area group are Partset B)
To change the state of an area group:
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press the relevant context-sensitive function key to change the state of the
whole area group.
To change the state of a single area (mixed set possible):
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press .
 All areas of this area groups are listed.
3. Scroll using the ▲ ▼ keys until the required area is visible.
4. Press the relevant context-sensitive function key to change the state.
A6V10271018
26.09.2011