Restoring An Alarm - Siemens SPCK620 User Manual

Multi area view
6

Restoring an alarm

6.3
20
Siemens AB
Security Products
Restoring an alarm
If there is any alarm, the alarm will be displayed after login.
The alarm will be displayed by the blinking symbol
NOTICE
There is a fixed soft key assignment to set / partset / unset areas or area groups.
Due to this the location of the alarm icon can vary. In the graphics below, there is
an alarm in fullset condition.
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press .
3. Scroll using the ▲ ▼ keys until the required area is visible.
4. Press the softkey below the blinking alarm symbol.
 In the next screen, the alarm(s) will be listed.
and the blinking LED
A6V10271018
26.09.2011
.