Single area view
5
Resetting a fault
5.4
16
Siemens AB
Security Products
3. Use the up and down arrow keys to scroll through the alarms.
There are 2 alarm symbols possible:
Alarm can not be restored. Alarm condition still present (e.g. the zone which caused the alarm is
!
!
still open). Please contact your installer if symbol is still indicated after closing according zone
(e.g. window).
Alarm can be restored.
If the alarm can be restored, press the softkey below the symbol
The alarm is restored.
Resetting a fault
If there is any fault, this will be displayed after login:
!
The symbol
is blinking.
!
The LED
is blinking.
1. Press the softkey below the blinking fault symbol.
NOTICE
The location of the different setting softkeys is fixed. Due to this the location of the
fault icon can vary. In the above picture, there is a fault in unset condition.
2. In the next screen, the fault(s) will be listed.
.
A6V10271018
26.09.2011