Interlocked Areas - Siemens SPCK620 User Manual

Multi area view
6

Interlocked Areas

6.7
24
Siemens AB
Security Products
Symbol
Interlocked Areas
Vault and ATM area types can be interlocked. This means that if more than one of
these area types is assigned to the same Interlock group, only one of the group
may be unset at a time. A padlock symbol displays next to an interlocked vault or
ATM area to indicate that it cannot be unset. Once you set one area in the group,
the padlock symbol is removed to indicate that you can unset another area in the
interlock group. When a calendar is assigned to an interlocked group to unset
automatically, the first area listed in the interlocked group will unset first and the
Timer Info and Timer Delay symbols will display as described in the section
Automatic Calendar Setting [➙ 22]. It is not possible to cancel setting for an ATM
or Vault area.
Function
The Time Lock symbol indicates if a vault
area is time locked. This means that the
vault area cannot be unset outside of the
times defined by the calendar assigned to
the area.
A6V10271018
26.09.2011