5.3
Siemens AB
Security Products
In the next screen, the information will be shown.
Following states are possible:
Symbol
Function
None
This open zone can be inhibited (forced set is possible).
This open zone can not be inhibited (no forced set possible). Please contact your
installer if symbol is still indicated after closing according zone (e.g. window).
Only available if the zone attribute Exit open is enabled.
The Entry – Exit zone is open. Zone will not prevent setting process. Zone has to be
closed at the end of the exit timer. If the zone is still open, setting will fail.
Restoring an alarm
If there is any alarm, the alarm will be displayed after login.
1. The alarm will be displayed by the blinking symbol
2. Press the softkey below the blinking alarm symbol.
NOTICE
The location of the different setting softkeys is fixed. Due to this the location of the
alarm icon can vary. In the above picture, there is an alarm in fullset condition.
In the next screen, the alarm(s) will be listed.
Single area view
5
Restoring an alarm
and the blinking LED
15
A6V10271018
26.09.2011
.