Login; Login With Pin; Login With Card (Spck623); Login With Pin And Card (Spck623) - Siemens SPCK620 User Manual

4 Login

4.1
4.2
4.3
Siemens AB
Security Products

Login with PIN

The display in idle state shows an analogue clock as default, but may differ
depending on system configuration.
 The keypad is in idle state.
Enter the valid user code with the digit keys to .

 The state of the area/area groups will be displayed.
NOTICE
How to correct input error
Delete incorrect input using the key and then enter the PIN again.
If the PIN is entered incorrectly 4 times, then input is blocked for one minute.
Wait for this amount of time and subsequently enter the PIN correctly.

Login with card (SPCK623)

 The card / pace must be assigned to a user and stored in the control panel.
Present the card to the card reader of the keypad.

The card reader receiving area is next to the alphanumeric keypad and is indicated
by following icon:

Login with PIN and card (SPCK623)

 The card and PIN option has to be activated in the control panel.
1. Present the card / pace to the keypad.
2. Enter the PIN with the keys to .
NOTICE
The pace has to be presented first.
If a code is entered first, the message "present pace" will be displayed. After
presenting the pace, due to the forced order, the PIN has to be entered again.
Login
4
Login with PIN
13
A6V10271018
26.09.2011