Single area view
5
Setting and unsetting the system
5 Single area view
5.1
5.2
14
Siemens AB
Security Products
Setting and unsetting the system
1. Enter a valid User code.
The following screen will be displayed.
2. Press the relevant context-sensitive function key to change the state of the
area.
Following states are possible:
Symbol
Function
Fullset
Unset
Partset A
Partset B
Setting not possible
If there is e.g. an open zone, the setting symbol will be displayed with an
information symbol:
Press the softkey below the setting symbol.
A6V10271018
26.09.2011