Setting Not Possible - Siemens SPCK620 User Manual

6.2
Siemens AB
Security Products
To change the state of all areas:
1. Scroll using the▼ key to ALL MY AREAS. (in area group view)
2. Press the relevant context-sensitive function key to change the state

Setting not possible

If there is e.g. an open zone, the setting symbol will be displayed with an
information symbol:
1. Scroll using the ▲ ▼ keys until the required area group is visible.
2. Press .
 All areas of this area groups are visible.
1. Scroll using the ▲ ▼ keys until the required area is visible.
2. Press the softkey below the setting symbol.
 In the next screen, the information about that zone will be shown.
 Following states are possible:
Symbol Function
None This open zone can be inhibited (forced set is possible).
This open zone can not be inhibited (no forced set possible). Please contact your
installer if symbol is still indicated after closing according zone (e.g. window).
Only available if the zone attribute Exit open is enabled.
The Entry – Exit zone is open. Zone will not prevent setting process. Zone has to be
closed at the end of the exit timer. If the zone is still open, setting will fail.
Multi area view
6
Setting not possible
A6V10271018
26.09.2011
19