System Status - Siemens SPCK620 User Manual

7.1.1
Siemens AB
Security Products
2 INHIBIT
3 ISOLATE
4 SET DATE/TIME
5 TEST
6 EVENT LOG
7 ACCESS LOG
8 CHIME
9 USERS
10 CHANGE PIN
11 SMS CONTROL
12 SMS EVENTS
13 DOOR CONTROL
14 GRANT ACCESS
15 REPORT TO ENG
If the Security Grade of the system is set to 'Unrestricted', then the INHIBIT,
ISOLATE and GRANT ACCESS features may not be available in the user menu.
A Standard or Manager Type User profile is required to access the user
programming menus.

SYSTEM STATUS

The System Status feature displays all faults on the system.
To view these faults:
1. Scroll to SYSTEM STATUS.
2. Press SELECT.
 A list of the alerts, isolations or open zones will be displayed.
 The status of the battery and auxiliary power is also displayed.
User programming via the keypad
Allows users to inhibit a zone.
Allows users to isolate a zone.
Allows users to set the time and date.
Allows users to perform a BELL TEST, WALK TEST, WPA
TEST or change AUDIBLE OPTIONS.
Allows users to view a log of the most recent events on the
system.
Allows users to view a log of the most recent access on the
system.
Allows user to enable or disable chime function on all zones
where the chime has been programmed as an audible alert
feature.
Allows Manager type users to add, edit, and delete users.
Allows users to change their user PIN..
Allows users to configure SMS PIN.
Allows users to set up the SMS service for sending short
text messages to mobile phones via the PSTN Line.
Allows the user to control doors. He can lock / unlock and
reset the door to normal operation.
Allows users to grant Engineer or Manufacturer access to
the system.
Allows the user to request that the last 10 events in the log
be sent to the engineer by SMS message. The 10 events
may require more than one SMS message, depending on
the size of their string.
7
User Menus
27
A6V10271018
26.09.2011