User Programming Via The Keypad; User Menus - Siemens SPCK620 User Manual

User programming via the keypad

7

User Menus

7 User programming via the keypad
7.1
26
Siemens AB
Security Products
User programming options are available using the LCD and Comfort Keypads.
Menus and options available on the intrusion control panel is programmed by the
installation engineer. If users cannot see an option described in this manual, they
do not have rights to access that functionality.
To access user programming:
1. Enter a valid User PIN.
2. Using the up/down arrow keys, scroll to the desired programming option.
3. Within a menu option, press # to select or enable/disable a parameter (for
example, a user right). The selected parameter is displayed with an * (for
example, *Inhibit).
 The keypad displays UPDATED momentarily to indicate a parameter change.
User Menus
1. Enter a valid User PIN.
2. Press the right navigation key ► to access the main menu.
3. To select a programming option, use the up/down arrow keys or enter the digit
listed in the table below.
1 SYSTEM STATUS Allows user to view the status of the following:
OPEN ZONES
ALERTS
ISOLATIONS
BATTERY
AUX
A6V10271018
26.09.2011