Event Log; Chime; Users; Add - Siemens SPCK620 User Manual

7.1.6
7.1.7
7.1.8
7.1.8.1
Siemens AB
Security Products
3. Select TEST ALL AREAS, or select an individual area to test.
4. If you select an individual area to test, you can select either TEST ALL ZONES
or select a specific seismic zone to test.
 The message 'SEISMIC TEST' is display on the keypad while the test is
being performed,
 If the test fails, the message 'SEISMIC FAIL' is displayed. If the "i" or VIEW
key is pressed, a list of the failed zones is displayed which can be scrolled
through.
 If the test succeeds, 'SEISMIC OK' is displayed.
See also Seismic Sensor Testing.

EVENT LOG

Recent events on the system are displayed in the EVENT LOG option. Events flash
in one second intervals.
1. Scroll to EVENT LOG and press SELECT.
2. To view an event from a particular date, enter the date with the numeric keys.
 The most recent events are displayed on the bottom line of the display. All
previous events are displayed for one second in turn.

CHIME

The chime function can be enabled or disabled on all zones where the chime has
been programmed as an audible alert feature.
To enable or disable the chime function:
1. Scroll to CHIME and press SELECT.
2. Toggle between ENABLED and DISABLED for the chime.

USERS

Only Manager type users have the ability to add, edit, or delete users, unless a
user profile has this capability assigned to their profile. Managers may add, edit or
delete users with these steps:

ADD

To add users to the system:
NOTICE
The creator must be user type MANAGER.
1. Scroll to USERS > ADD.
 The system generates and displays next available user name.
User programming via the keypad
User Menus
7
31
A6V10271018
26.09.2011