Using The Answering Machine - Doro 5055R Manual

English
The Answering Machine (5065R)

Using the Answering Machine

When new ICM's are recorded
button on the back of the handset. Playback will always be new
a
ICM's only, the answering machine will then return to standby mode.
Press to playback all messages, starting with the oldest ICM.
2
1. Ensure the
a
button located on the back of the handset is illuminated.
2. The total number of (new) recorded ICM's will now be announced.
Before each ICM the day and time the message was received will be
announced, and a short beep will be heard between each message.
3. Listen to your ICM's, or press
4. Select an operational command from the table below by pressing the
corresponding button.
5. All messages will be saved (unless erased during playback) and new
messages will be recorded after any old messages.
Command
1 ..................................Repeat/skip to previous message
2 ..................................Playback of messages
3 ..................................Skip to next message
42 ................................Record a MEMO (to stop recording press
45................................Record new outgoing message, (to stop
6 ..................................Erase individual messages during playback
6 (press & hold)...........Erase all messages after playback
7 ..................................Switching On the answering machine (the
8 ..................................Stop
9 ..................................Switching Off the answering machine (the
28 28 28
will fl ash in the display and also the
symbol is visible within the display, and the
8
Function
recording press
display will show
display will no longer show
to stop playback.
)
8
)
a
a
8
)
a
www.doro.com www.doro.com
)