Table of Contents
Advertisement
Only for models with an extra handset (5065R+1/5055+1):
8. Connect the mains adapter to the Y socket of the charger pod
and to an electrical wall socket.
9. Remove the battery cover from the back of the handset. Insert
the batteries into the handset ensuring correct battery polarity is
observed. Replace the battery cover.
10.Place the handset in the charger pod and charge the handset
batteries without interruption for 24 hours initially (thereafter fully
discharged handset batteries will take up to 14 hours to recharge).
11.ONCE CHARGED, if the range symbol in the display continually
fl ashes please refer to page 18, Register a New Handset or Base Unit.
IMPORTANT!
Under power failure conditions, this telephone will not operate. Please ensure that a
separate telephone, not dependent on local power, is available for emergency use. The
earpiece of the handset may attract small ferromagnetic objects such as staples and
pins, care should be taken when placing the handset near these items. Do not place the
base unit in areas of high humidity or where it will be exposed to direct sunlight or
other major heat sources. Only use with the supplied power adapter.
www.doro.com
Installation
English
5
Advertisement
Table of Contents
