Table of Contents
Advertisement
Important!
Please note when programming all references to press = to press once and then
immediately release the button.
Making a Call
1. Enter the required telephone number. Mistakes can be erased using x.
2. Press
, the telephone number will now be dialled.
O
3. Press
again to terminate the call.
again to terminate the call.
O
O
O
Receiving a Call
1. Wait for the handset to ring.
2. Press
to answer the call.
to answer the call.
O
O
O
3. Press
again to terminate the call.
again to terminate the call.
O
O
O
Please note!
The telephone's ringing signal does not follow the line signal, ie it may continue to ring
for up to 7 seconds after answering a call. If the telephone cannot connect to a line,
a warning tone will be heard. The problem may be due to the batteries running low,
the handset being too far from the base unit or all of the transmission channels being
engaged.
Redial Button
The fi ve most recently dialled numbers can easily be redialled using
1. Press
and scroll to the required telephone number using
r
2. Press
the displayed telephone number will now be dialled.
the displayed telephone number will now be dialled.
O
O
O
Volume Control
5055: The earpiece volume may be adjusted during a call by pressing
5065R: The volume is adjusted by accessing the menu, please refer to
page 22.
The display will show the selected volume: +=low, ++=medium,
+++=high, and ++++=maximum.
www.doro.com
Operation
English
:
r
/
.
8 8
9 9
.
9
Advertisement
Table of Contents
