Answering Machine (DECT 360)
Introduction
The internal answering machine can be used to store messages digitally.
Incoming messages are time-stamped with a voice that recounts the day of the
week and the time when the message was received.
When the answering machine is activated it will answer incoming calls. The
caller hears your outgoing message followed by a tone, the caller can then
leave a message up to 2 minutes in length. The total recording capacity is
15 minutes. This time is distributed between the outgoing message and the
incoming messages.
The answering machine is voice activated, which means that only those callers
who leave a message are registered.
Remote control functions enable you to ring the answering machine and play
back recorded messages from an external telephone.
Button
OGM
<</>>-
PLAY/STOP
DELETE
!
+/-
The following buttons are located under the base unit.
CODE
RING
TIME
www.doro.com
DECT160-360_20010530.indd
Function
- Is used to record and listen to your outgoing message.
- Browse the incoming messages.
- Listen to messages received. Press again to stop playback.
- Delete messages.
- Activate the answering machine.
- Adjust the speaker volume.
- Remote access code.
- Number of rings before the machine answers.
- Day/Time stamp.
24-25
English
25
2001-05-30, 11:30