Register A New Handset Or Base Unit; De-Register A Handset - Doro 5055R Manual

English

Register a New Handset or Base Unit

To enable the use of more than one handset a registration has to be
performed. Every new handset must be registered in order to use a base
unit. A maximum number of 2 base units can be registered with each
handset, and each base unit can handle up to 4 handsets.
Additional base units and handsets can be purchased from your local
retailer.
Please also refer to page 23 for more information on Expanded Systems.
1. Disconnect the electrical adapter to the BASE UNIT for a few
seconds, and then reconnect.
(
2. Press
w R
3. Scroll using
4. Enter the PIN code
5. The handset will now search for the base unit.
6. If the registration is successful the handset will return to standby
mode in a few seconds (max 90 seconds). If registration is
unsuccessful repeat this procedure.

De-register a Handset

Handsets can easily be de-registered from a base.
(
1. Press
w R
2. Press the keypad digits
3. Enter the PIN code (1111 for this model).
4. Press .
0 0 0
18 18 18
Settings
) .
/ until
8 8 9 9 P P P
(1111 for this model)
) .
9 4
starts fl ashing in the display. Press starts fl ashing in the display. Press
. Press
.
.
0 0 0
www.doro.com www.doro.com
.
0 0 0