Answering Machine; Setup From Handset - Doro COMFORT 1005 Manual

Enter base unit's PIN code (default code is 0000). Press OK.
4.
5. If the registration is successful the unit will return to standby within one
minute.
Intercom / internal call
1. Press .
2. Enter call number 1 - 5 for the desired handset or press 9 for all.
A tone will be heard if an external call comes in while an internal call is
in progress. End the internal call with L and then answer the external
call with q.
Transferring calls/conference between handsets
When an external call is connected;
1. Press .
Select INTERCOM. Press OK.
2.
If using more than 2 handsets: Enter call number 1 - 5 for the desired
handset or press 9 for all.
3. To transfer: press L,
for conference: press and hold * .
When the answering machine is switched on, calls are answered after a set
number of rings, your outgoing message is heard and the caller can leave a
message. Total memory capacity is up to 15 minutes depending on the set
sound quality. Most functions can be accessed from both base unit and handset.

Setup from handset

. Select ANS. MACHINE. Press OK.
1. Press
Select TAM SETTINGS. Press OK.
2.
Select desired function. Press OK.
3.
Select desired setting. Press OK.
4.
ANSWER MODE
TAM LANGUAGE Select language for pre-recorded outgoing message.
OGM SETTINGS
ANSWER DELAY Select after how many rings (2 RINGS – 8 RINGS or TIME
RECORD TIME

Answering machine

Select ANS & REC or ANSWER ONLY (caller cannot leave
message).
Record/listen to outgoing messages.
SAVER) the call will be answered.
Select maximum recording time for each message.
English
7