Doro 5055R Manual page 35

The Answering Machine Is Not Answering
- Check that the unit is switched on
- Check that the telephone cable and the mains adapter are correctly
connected.
- Check that the answering machine is not full.
The Answering Machine Does Not Respond to Remote Control
- Check that the telephone you are using to remotely control the
answering machine is a tone dialling telephone.
- Some telephones only output a short tone beep when buttons are
pressed, and this may not be enough to activate remote control.
Please use a separate tone transmitter in these cases.
- Also try holding the buttons down longer, approximately 1 second Also try holding the buttons down longer, approximately 1 second
per digit.
I can't hear the outgoing message very well
- Record a new outgoing message.
- Speak closer to the microphone when recording.
The line is disconnected when someone leaves a message:
- An incoming message may be up to 120 seconds in length. After this
time, the call will be disconnected.
- If the caller pauses approximately 7 seconds or more, the call may be
terminated, since the voice control function believes that the caller
has hung up.
- If the function Announcement only is activated the caller cannot
leave a message.
If the telephone still does not work, contact the place of purchase. Don't
forget the receipt or copy of the invoice.
www.doro.com
Other
English
35