Using Phone Hardware And Accessories; Using The Speakerphone; Using The Headset With Your Ip Phone; Switching Between The Handset/Headset/Speakerphone During A Call - Cisco SPA500 Series User Manual

Using Basic Phone Functions

Using Phone Hardware and Accessories

Using Phone Hardware and Accessories

NOTE
Cisco Small Business Pro IP Phone SPA50X User Guide (SIP)

Using the Speakerphone

To use the speakerphone, press the Speaker button (the handset can be either on
or off hook).

Using the Headset with Your IP Phone

Install the headset as described in the
Headsets (Optional)" section on page
Steps to use your headset with the IP phone may vary. Consult the user
documentation for your headset for more information.
To use a wired headset, press the Headset button on your phone and dial the
number to place a call, or press the headset button to answer a ringing call.
To use a wireless headset, lift the receiver off hook before speaking or listening
through the headset.
Switching Between the Handset/Headset/Speakerphone
During a Call
Any of these audio devices can be used during a call. Only one device at a time
can be used.
The handset can be on the hook when using the speakerphone or headset
function. If switching from the handset to the speakerphone, make sure the
speakerphone or headset light is illuminated before placing the handset back on
the hook. (If you are switching from the handset to a wireless headset, however, do
not replace the handset or you will disconnect the call.)

Sending Audio to the Phone Speaker

Choosing this option sends audio to the speaker when the handset is lifted.
"Connecting Wired and Wireless
21.
3
27