How To Set Up A Wireless Network; Example Parameters; Configuring The Ap - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 3 Tutorials
Try to connect to a website, such as "www. zyxel.com" to see if you have correctly set up your
Internet connection. Be sure to contact your service provider for any information you need to
configure the WAN screens.

3.3 How to Set up a Wireless Network

This section gives you examples of how to set up an access point and wireless client for wireless
communication using the following parameters. The wireless clients can access the Internet
through the Device wirelessly.

3.3.1 Example Parameters

SSID
802.11 mode
Channel
Security
An access point (AP) or wireless router is referred to as the "AP" and a computer with a wireless
network card or USB adapter is referred to as the "wireless client" here.
We use the M-302 utility screens as the wireless client example. The screens may vary for different
models.

3.3.2 Configuring the AP

Follow the steps below to configure the wireless settings on your AP.
36
SSID_Example3
802.11b/g
auto
WPA-PSK
(Pre-Shared Key: 12MyWPAPSKpresharedkey34)
P-2812HNU(L)-Fx Series User's Guide