ZyXEL Communications P-2812HNU-51c User Manual page 97

5.2.1.2 Routing- IPoE (VDSL)
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select VDSL or EtherWAN as the interface type,
Routing as the encapsulation mode and IP over Ethernet as the WAN service type.
Figure 19 Broadband Add/Edit: Routing- IPoE (VDSL/EtherWAN)
Figure 20 6to4 Tunneling
The following table describes the fields in this screen.
Table 8 Broadband Add/Edit: Routing- IPoE (VDSL/EtherWAN)
LABEL
General
Name
Type
Mode
P-2812HNU(L)-Fx Series User's Guide
DESCRIPTION
Enter a service name of the connection.
Select VDSL or EtherWAN as the interface that you want to configure.
VDSL: The Device uses the VDSL technology for data transmission over the
DSL port.
EtherWAN: The Device transmits data over the Ethernet WAN port. Select this
if you have a DSL router or modem in your network already.
Select Routing (default) from the drop-down list box if your ISP give you one
IP address only and you want multiple computers to share an Internet account.
Chapter 5 Broadband
97