ZyXEL Communications P-2812HNU-51c User Manual page 154

Chapter 7 Home Networking
Use this screen to change your Device's static DHCP settings. Click Network Setting > Home
Networking > Static DHCP to open the following screen.
Figure 49 Network Setting > Home Networking > Static DHCP
The following table describes the labels in this screen.
Table 29 Network Setting > Home Networking > Static DHCP
LABEL
Add new static
lease
#
Status
Host Name
MAC Address
IP Address
Reserve
Apply
Cancel
Refresh
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 50 Static DHCP: Add
The following table describes the labels in this screen.
Table 30 Static DHCP: Add
LABEL
MAC Address
IP Address
154
DESCRIPTION
Click this to add a new static DHCP entry.
This is the index number of the entry.
This field displays whether the client is connected to the Device.
This field displays the client host name.
The MAC (Media Access Control) or Ethernet address on a LAN (Local Area
Network) is unique to your computer (six pairs of hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired address
that is assigned at the factory. This address follows an industry standard that
ensures no other adapter has a similar address.
This field displays the IP address relative to the # field listed above.
Select the check box in the heading row to automatically select all check boxes
or select the check box(es) in each entry to have the Device always assign the
selected entry(ies)'s IP address(es) to the corresponding MAC address(es) (and
host name(s)). You can select up to 128 entries in this table.
Click Apply to save your changes.
Click Cancel to restore your previously saved settings.
Click Refresh to reload the DHCP table.
DESCRIPTION
Enter the MAC address of a computer on your LAN.
Enter the IP address that you want to assign to the computer on your LAN with
the MAC address that you will also specify.
P-2812HNU(L)-Fx Series User's Guide