Edit Phone Device - ZyXEL Communications P-2812HNU-51c User Manual

Chapter 16 VoIP
The following table describes the labels in this screen.
Table 64 VoIP > Phone > Phone Device
LABEL
#
Phone ID
Outgoing SIP
Number
Modify

16.6.1 Edit Phone Device

You can decide which SIP accounts the phones connected to the Device use by clicking the Edit icon
next to a Phone ID. The following screen displays.
You cannot edit the account if it is not activated. Go to VoIP > SIP > SIP Account > Edit to
activate a SIP account (see
Figure 105 Phone Device: Edit
The following table describes the labels in this screen.
Table 65 Phone Device: Edit
LABEL
SIP Account to Make Outgoing Call
SIP Account
SIP Number
SIP Account(s) to Receive Incoming Call
SIP Account
SIP Number
230
DESCRIPTION
This is the index number of the entry.
This is the phone device number.
This is the outgoing SIP number of the phone device.
Click the Edit icon to configure the SIP account.
Section 16.3 on page 224
DESCRIPTION
Select the SIP account you want to use when making outgoing calls with the
analog phone connected to this phone port.
This shows the SIP account number.
Select a SIP account if you want to receive phone calls for the selected SIP
account on this phone port.
If you select more than one SIP account for incoming calls, there is no way to
distinguish between them when you receive phone calls. If you do not select a
source for incoming calls, you cannot receive any calls on this phone port.
This shows the SIP account number.
for more information).
P-2812HNU(L)-Fx Series User's Guide