The Reboot Screen - ZyXEL Communications P-2812HNU-51c User Manual

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the Device to
its factory defaults. The following warning screen appears.
Figure 132 Reset Warning Message
Figure 133 Reset In Process Message
You can also press the RESET button on the back panel to reset the factory defaults of your Device.
Refer to Section 1.7 on page 26

25.3 The Reboot Screen

System restart allows you to reboot the Device remotely without turning the power off. You may
need to do this if the Device hangs, for example.
Click Maintenance > Reboot. Click the Reboot button to have the Device reboot. This does not
affect the Device's configuration.
P-2812HNU(L)-Fx Series User's Guide
for more information on the RESET button.
Chapter 25 Backup/Restore
267