ZyXEL Communications P-2812HNU-51c User Manual page 100

Chapter 5 Broadband
5.2.1.3 Routing- PPPoE (ADSL)
Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon
next to the connection you want to configure. Select ADSL as the interface type, Routing as the
encapsulation mode, and PPPoE as the WAN service type.
Figure 21 Broadband Add/Edit: Routing- PPPoE (ADSL)
Figure 22 6to4 Tunneling
The following table describes the fields in this screen.
Table 9 Broadband Add/Edit: Routing- PPPoE (ADSL)
LABEL
General
Name
Type
Mode
100
DESCRIPTION
Enter a service name of the connection.
Select ADSL as the interface that you want to configure. The Device uses the
ADSL technology for data transmission over the DSL port.
Select Routing (default) from the drop-down list box if your ISP give you one
IP address only and you want multiple computers to share an Internet account.
P-2812HNU(L)-Fx Series User's Guide