The Phone Region Screen; The Call Rule Screen - ZyXEL Communications P-2812HNU-51c User Manual

Table 65 Phone Device: Edit (continued)
LABEL
FXO Interface to Receive Incoming Call
Enable
Apply
Back

16.7 The Phone Region Screen

Use this screen to maintain settings that depend on which region of the world the Device is in. To
access this screen, click VoIP > Phone > Region.
Figure 106 VoIP > Phone > Region
Each field is described in the following table.
VoIP > Phone > Region
Table 66
LABEL
Region Settings
Call Service Mode
Apply
Cancel

16.8 The Call Rule Screen

Use this screen to add, edit, or remove speed-dial numbers for outgoing calls. Speed dial provides
shortcuts for dialing frequently-used (VoIP) phone numbers. You also have to create speed-dial
entries if you want to call SIP numbers that contain letters. Once you have configured a speed dial
rule, you can use a shortcut (the speed dial number, #01 for example) on your phone's keypad to
call the phone number.
P-2812HNU(L)-Fx Series User's Guide
DESCRIPTION
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port.
Click Apply to save your changes.
Click Back to return to the previous screen without saving.
DESCRIPTION
Select the place in which the Device is located.
Select the mode for supplementary phone services (call hold, call waiting,
call transfer and three-way conference calls) that your VoIP service
provider supports.
• Europe Type - use supplementary phone services in European mode.
• USA Type - use supplementary phone services American mode.
You might have to subscribe to these services to use them. Contact your
VoIP service provider.
Click this to save your changes and to apply them to the Device.
Click this to set every field in this screen to its last-saved value.
Chapter 16 VoIP
231