ZyXEL Communications P-2812HNU-51c User Manual page 37

Open the Network Setting > Wireless > General screen in the AP's web configurator.
1
Tutorial: Network > Wireless LAN > General
Make sure Enable Wireless LAN is selected.
2
Enter "SSID_Example3" as the SSID and select Auto in the Channel Selection field to have the
3
device search for an available channel.
Select 802.11b/g in the Mode Select field.
4
Select More Secure as your security level and set security mode to WPA-PSK and enter
5
"12MyWPAPSKpresharedkey34" in the Pre-Shared Key field. Click Apply.
Click Connection Status > System Info.Verify your wireless and wireless security settings under
6
Device Information and check if the WLAN connection is up under Interface Status.
Tutorial: Network > Wireless LAN > SecuritOpen the Status screen. Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status
Tutorial: Status
P-2812HNU(L)-Fx Series User's Guide
Chapter 3 Tutorials
37