Setting Up A Conference - Polycom SoundPoint IP 670 SIP User Manual

Setting Up a Conference

Note
Note
You can create a conference with other parties using the phone's local
conference feature. You can create a conference at any time between an active
call and a call on hold (on the same or another line) by pressing the More and
Join soft keys. The conference management feature allows you to view all
parties in a conference call. You can also add, hold, remove, and mute
individual parties from one screen on the graphic
The conference management feature is an optional feature and may not be
supported on your particular system. For more information, contact your system
administrator.
This section provides the following step-by-step instructions:
• Setting Up Conference Calls
• Managing Conferencing Calls
• Adding Parties to Conference Calls
• Joining Conferences
• Splitting Conference Calls
• Ending Conferencing Calls
Setting Up Conference Calls
To set up a conference call:
1. Call the first party.
You can either dial the phone number directly or search for the number in the
Contact Directory or Call Lists. For more information, refer to
3-2, Searching For a Contact
Using the Basic Features of Your SoundPoint
on page 2-18, or Managing Call Lists
®
IP 670 Desktop Phone
display.
Placing Calls on page
on page 2-11.
3 - 11