Polycom SoundPoint IP 670 SIP User Manual page 27

Full-duplex, hands-free desktop phone
Table of Contents

Advertisement

If you do not press any keys on the phone, after 20 seconds of the backlight
turning on, the backlight dims (or changes) to medium in the following cases:
A call is in progress
A call is on hold
There is an incoming call (ringing)
There is an outgoing call (ringing back)
Any menu shows on the display
In all other cases, the mode changes to Backlight Idle.
To modify the backlight intensity:
1. Press
2. Select Settings > Basic > Backlight Intensity.
3. Select Backlight On Intensity.
4. Use
or
Select soft key.
The default level is medium.
5. Select Backlight Idle Intensity.
Customizing Your SoundPoint
.
to select high, medium, low, or off, and then press the
®
IP 670 Desktop Phone
2 - 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Soundpoint ip 670

Table of Contents