Using Text Messaging - Polycom SoundPoint IP 670 SIP User Manual

Using Text Messaging

Note
Using the Advanced Features of Your SoundPoint
This places the original call on hold and refreshes the soft key labels as
indicated in the following figure.
If more than two call appearances are in use, two will appear on the display
and the total number will be indicated by a counter at the bottom right corner
of the display. For example "2/3" indicates that the highlighted call is the
second one out of a total of three.
You can also place another outbound call on the same first line. Press
during the first call and press the NewCall soft key to obtain dial tone for a
second call.
You can send and receive text messages using your phone. Text messaging is
supported in real-time. Your phone indicates text messages by a flashing
Message Waiting Indicator LED on the front of the phone and optionally a
visual notification on the graphic display.
To read text messages:
1. Do one of the following steps:
— Press
Select Instant Messages.
Screen options may vary with your application. Text messaging may be accessible
with a single key press. Contact your system administrator about this option.
.
®
IP 670 Desktop Phone
4 - 3