Changing The Headset Memory Mode - Polycom SoundPoint IP 670 SIP User Manual

User Guide SoundPoint IP 670 Phone

Changing the Headset Memory Mode

2 - 6
6. Use or
Select soft key.
The default level is low.
7. Select Maximum Intensity.
8. Press the Up or Down soft keys to increase or decrease the backlight
intensity.
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press
2. Select Settings > Basic > Preferences > Headset... > Headset Memory...
3. Use or
4. Press
to select high, medium, low, or off, and then press the
to return to the idle display.
.
to select Enabled, and then press the Select soft key.
to return to the idle display.