Table of Contents
Advertisement
User Guide SoundPoint IP 670 Phone
Note
Note
4 - 10
return to speaking with party A. You end your call with party A and recording
stops. Your conversations with parties A, B, and C are all recorded in the same
.wav file as follows:
When you plug in the USB device, the message "USB device attached."
appears. When you remove the USB device, the message "USB device
removed." appears.
Wait until the "USB device removed." message disappears before plugging in
another USB device. If you plug in a new USB device before the message
disappears, it will not be recognized.
If there is insufficient free space on the USB device when you press the Start
soft key, recording does not start and the message "USB device is full.
Recording cancelled." appears.
If the USB device becomes full during recording, recording stops and the
message "USB device is full. Recording stopped." appears.
If you remove the USB device during recording, recording stops and the
message "USB device removed unsafely. Recording cancelled." appears.
Polycom recommends that you do not remove the USB device while recording. The
file being recorded at that time will be incomplete and cannot be played back later.
There is a small probability that the USB device itself may be damaged by this
action.
If you plug in your USB device into your SoundPoint IP 670 and the message
"Unsupported USB device attached" appears, contact your system administrator
about which USB devices are supported.
Advertisement
Table of Contents
