Table of Contents
Advertisement
To place a call using the handset:
1. Do the following steps in any order:
— Pick up the handset.
— Dial the desired number using the dial pad.
Note
You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press the Menu key followed by Status > Platform > Phone. The IP
address is listed together with other phone information. For example, 10.3.0.42, sip:
jane@polycom.com.
Press the URL soft key and enter the URL or IP address. Use * for "." and # for "@".
Then press the Send soft key to complete the call.
Support for SIP URL or IP address calling may be disabled. Contact your system
administrator.
To place a call using Hands-Free Speakerphone mode:
Note
If "Handsfree mode disabled" appears on the graphic display after you press the
speakerphone key
your phone.
1. Do one of the following steps:
— With the handset on-hook, press
Call soft key to obtain a dial tone.
Dial the desired number using the dial pad.
— With the handset on-hook, dial the desired number using the dial pad.
Press
Using the Basic Features of Your SoundPoint
,
your system administrator has disabled the speakerphone on
,
, or the Dial soft key.
®
IP 670 Desktop Phone
,
, or the New
3 - 3
Advertisement
Table of Contents
