Lexmark MS719 User Manual page 53

Loading paper and specialty media
•
If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge
of the paper are on the right side of the tray.
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
•
Do not slide the paper into the tray. Load paper as shown in the illustration.
Without an optional staple finisher With an optional staple finisher
Two‑sided printing
One‑sided printing
Two‑sided printing
Two‑sided printing
53