Saving Energy - Lexmark MS719 User Manual

Saving money and the environment
Avoid paper jams
Correctly set the paper type and size to avoid paper jams. For more information, see

Saving energy

Using Eco‑Mode
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Eco‑Mode.
3
Select a setting.
Use To
Off Use the factory default settings for all settings associated with Eco‑Mode.
Notes:
•
Settings that were changed when other modes were selected are reset to the factory default
settings.
•
Off supports the performance specifications of the printer.
Energy Reduce energy use, especially when the printer is idle.
Notes:
•
Printer engine motors do not start until a document is ready to print. You may notice a short
delay before the first page is printed.
•
The printer enters Sleep mode after one minute of inactivity.
• The printer display is turned off when the printer is in Sleep mode.
•
Lights on the staple finisher and other optional finishers are turned off when the printer is in
Sleep mode.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Plain Paper Enable the automatic two‑sided (duplex) printing feature.
4
Click Submit.
Reducing printer noise
Enable Quiet mode to reduce the printer noise.
1
From the printer control panel, navigate to:
> Settings >
2
Select a setting.
> Settings > > General Settings >
"Avoiding jams" on page
> Quiet Mode >
134
163.