Lexmark MS719 User Manual page 195

Troubleshooting
5
Connect the power cord to a properly grounded electrical outlet.
6
Turn the printer back on.
•
Remove the specified bin:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the specified bin.
4
Contact customer support.
•
From the printer control panel, press
Reattach bins [x] – [y]
Try one or more of the following:
•
Turn off the printer, and then turn it back on.
•
Reattach the specified bins:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the specified bins.
4
Reattach the bins.
5
Connect the power cord to a properly grounded electrical outlet.
6
Turn the printer back on.
•
Remove the specified bins:
1
Turn off the printer.
2
Unplug the power cord from the electrical outlet.
3
Remove the specified bins.
4
Contact customer support.
From the printer control panel, press
Reinstall missing or unresponsive cartridge [31.xy]
Try one or more of the following:
•
Check if the toner cartridge is missing. If missing, install the toner cartridge.
For information on installing the cartridge, see the "Replacing supplies" section of the User's Guide.
•
If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.
Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner
cartridge.
to clear the message and print without using the specified bin.
to clear the message and print without using the specified bins.
195