Lexmark MS719 User Manual page 155

Maintaining the printer
3
Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.
4
Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.
5
Push the staple cartridge into the finisher until it clicks into place.
6
Close the stapler door.
Replacing the fuser wiper cover assembly
1
Turn off the printer.
2
Squeeze the fuser wiper cover tab, and then lift to remove the cover assembly.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
1
1
2
1
155