Lexmark MS719 User Manual page 192

Troubleshooting
Load Manual Feeder with [custom type name] [orientation]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
• Cancel the current job.
Load Manual Feeder with [paper size] [orientation]
Try one or more of the following:
•
Load the feeder with the correct size of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
•
Cancel the current job.
Load Manual Feeder with [paper type] [paper size] [orientation]
Try one or more of the following:
•
Load the feeder with the correct size and type of paper.
•
From the printer control panel, press
Note: If no paper is loaded in the feeder, then the printer manually overrides the request, and then prints from
an automatically selected tray.
•
Cancel the current job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, visit the Lexmark support Web site at
http://support.lexmark.com
If necessary, press
Maintenance kit nearly low [80.xy]
For more information, visit the Lexmark support Web site at
and then report the message.
If necessary, press
to clear the message and continue printing.
to clear the message and continue printing.
to clear the message and continue printing.
or contact customer support, and then report the message.
on the printer control panel to clear the message and continue printing.
on the printer control panel to clear the message and continue printing.
http://support.lexmark.com or contact customer support,
192