Printing Slows Down; Tray Linking Does Not Work - Lexmark MS719 User Manual

Troubleshooting
Action
Step 5
a
Turn off the printer, then wait for about 10 seconds, and then turn the
printer back on.
b
Resend the print job.
Do the jobs print?
Step 6
a
Remove, and then reinstall the printer software. For more
information, see "Installing the printer software" on page
Note: The printer software is available at
http://support.lexmark.com.
b
Resend the print job.
Do the jobs print?

Printing slows down

Notes:
• When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the fuser.
•
The printer speed may be reduced when printing for long periods of time, or printing at elevated temperatures.
Action
Step 1
a
Make sure the size of the paper loaded in the tray matches the fuser
type.
Note: To identify the fuser type, view the label on the fuser.
b
Resend the print job.
Does the print speed increase?
Step 2
a
Replace the fuser.
For more information on installing the fuser, see the instruction sheet
that came with the part.
b
Resend the print job.
Does the print speed increase?

Tray linking does not work

Notes:
• The trays can detect paper length.
•
The multipurpose feeder does not automatically detect the paper size. You must set the size from the Paper
Size/Type menu.
Yes
The problem is solved. Go to step 6.
The problem is solved. Contact
37.
Yes
The problem is solved. Go to step 2.
The problem is solved. Contact
214
No
customer
support.
No
customer
support.