Bang & Olufsen BeoVision 4 Reference Book page 31

Link room operation
When you are in the link room, you can
operate all connected systems with the Beo4
remote control.
Use sources present only in
one of the rooms...
Press the button for the source
you wish to use
Operate the selected source as
usual
Use a source placed in the
main room – source type
present in both rooms...
Press repeatedly to display LINK*
on Beo4
Press the button for the source
you wish to use
Operate the selected source as
usual
Use a source placed in the link
room – source type present in
both rooms...
Press the button for the source
you wish to use
Operate the selected source as
usual
Listen to stereo sound in your link room...
Sound distributed from a main room video source,
RADIO
such as a set-top box, to the link room will usually
A MEM be transmitted in mono. However, you can select
DTV stereo sound:
> Press for example DTV to switch on a set-top
box connected to the main room system.
> Press LIST repeatedly to display AV* on Beo4.
> Press DTV again to hear stereo sound.
IMPORTANT! While using this function, distribution
LIST of other main room sources to other link room
LINK systems is not possible!
TV Timed play or timed standby settings can also be
executed on a link room BeoVision 4. They must
be programmed on the system in the main room
and the Timer function must be activated on the
BeoVision 4. For more information, refer to the
chapter 'Make BeoVision 4 start and stop
automatically' on page 18 in the Guide.
TV
Main room Link room
Link room
Main room
*In order to display LINK or AV on Beo4, you must
add it to the Beo4 list of functions. For further
information, refer to the chapter 'Customise Beo4'
on page 32.
31