Bang & Olufsen BeoVision 4 Reference Book page 6

6
Mount and connect the IR receiver
To facilitate remote control operation of
BeoVision 4 and all connected equipment, you
must connect the IR receiver to BeoSystem 2.
The IR receiver is a kind of 'eye' which is
capable of receiving signals from your Beo4
remote control and sending them to
BeoSystem 2. BeoSystem 2 then sends the
appropriate control signals to your plasma
screen or other connected equipment.
When mounting the IR receiver, make sure to
place the receiver on the same wall as the
screen. If the IR receiver is placed incorrectly,
the light emitted by the screen can impede
remote control operation of BeoVision 4!
When you have mounted the IR receiver as
shown on this page, connect it to the
IR IN socket on BeoSystem 2.
>> Set up BeoVision 4 and BeoSystem 2
A
B
B
B
White
Blue
Green
Yellow
Black
Brown
Grey
Red
B
C D
D
C
D
C