Bang & Olufsen BeoVision 4 Reference Book page 10

10
Speaker and digital input socket panel
FRONT
The two sockets are used for connecting the front
speakers in a surround sound setup.
CENTRE
Socket for connecting centre speakers in a
surround sound setup.
REAR
The two sockets are used for connecting the rear
speakers in a surround sound setup.
SUBWOOFER
Socket used for connecting a BeoLab 2 subwoofer
in a surround sound setup.
SPDIF 1
Digital input socket for connection of, for
example, a DVD player. SPDIF 1 is for digital input
from equipment connected to the AV socket on
BeoSystem 2.
SPDIF 2
Digital input socket for connection of, for
example, a DVD player. SPDIF 2 is for digital input
from equipment connected to the V.TAPE socket
on BeoSystem 2.
If the V.TAPE socket is set up for V.Mem or None,
the SPDIF 2 socket is dedicated to the equipment
connected to the DECODER socket instead.
>> Socket panels
FRONT CENTRE FRONT
REAR SUBWOOFER REAR
Additional sockets
SPDIF
1
ON/OFF
Mains switch.
2
IR IN
For connection of a BeoLink IR receiver enabling
remote control operation of BeoVision 4.
MAINS
Connection to the mains.
RGB
For connection of the screen.
RS232
For connection of the screen.
FAN
For connection of an external ventilator.
S-VHS / VIDEO / R / L / PHONES
The Camcorder and headphones sockets. For
more information, refer to the chapter 'Close-up
socket panel on BeoSystem 2' on page 12.