Bang & Olufsen BeoVision 4 Reference Book page 37

Freq Pr Name
210 1 . . . . . . . .
What's on the first TV manual tuning menu...
Freq (frequency)
Searching stops at the first channel producing
an acceptable signal. If you know a channel's
exact frequency number, key it in directly using
the number keys on the Beo4 remote control.
(System)
If System appears in the menu, make sure that
the correct broadcast system is displayed before
you start tuning.
Pr (program number)
Enter the program number (1-99) you wish to
give the channel.
Name
The name you give a channel will appear in the
TV channel list. A name may contain up to eight
characters, including the letters A-Z, numbers
and full stop. For further information, refer to
the chapter 'Name tuned channels' on page 30
in the Guide.
More
If it is necessary to fill in extra information,
move to More and press GO. A second manual
tuning menu appears.
Fine Decoder
More 0 Off
What's on the second TV manual tuning
menu...
Fine (fine tuning)
The TV automatically tunes to the best possible
picture. However, neighbouring channels may
blur the picture slightly, in which case fine
tuning may be required. The fine tuning range is
+8 to -8.
Decoder
If you have only one decoder connected, your
options are On or Off. If you have two decoders
connected to BeoSystem 2, you can choose
between Dec1, Dec2, or Off.
Sound (mono/stereo/language)
Several types of sound may be available for a TV
channel. Examples can be stereo sound, mono
sound, or other languages.
Even though you store a type of sound/
language, you can switch between the various
types while you are watching a particular TV
channel. For information about the various
types of sound available, refer to the chapter
'Change sound type or language' on page 9 in
the Guide.
Sound
Stereo-2
What's on the Adjustment menu...
Volume
The volume level can be adjusted in steps of
two within a range of 00 to 72.
Bass
Bass tone can be adjusted in steps of one within
a range of +6 to -6. 0 is the neutral setting.
Treble
Treble tone can be adjusted in steps of one
within a range of +6 to -6. 0 is the neutral
setting.
Loudness
Loudness can be set to On or Off. The loudness
function is used to compensate for the human
ear's lack of sensitivity to high and low
frequencies. It boosts the low and the high
frequencies when you are listening to low
volume levels so that the music becomes more
dynamic.
Subwoofer (only available if you have connected
a BeoLab 2 subwoofer to BeoSystem 2).
Can be adjusted in steps of one within a range
of +9 to -9. 0 is the neutral setting.
Volume Bass Treble Loudness
32 0 0 On
37