Bang & Olufsen BeoVision 4 Reference Book page 22

22
You can connect a High Definition (HD)
source, such as a set-top box or DVD
recorder, to BeoSystem 2. This gives you
access to digital video sources. You can
also connect a PC.
You can also connect these sources to
BeoVision 4.
Make sure you register all connected
equipment in the BeoSystem 2
Connections menu. Note, however, that
connection of HD sources may limit or
change some BeoSystem 2 functions.
These limitations and changes are
described in this chapter.
For further information about the
Connections menu, refer to page 40.
Connect a High Definition source or PC
Connection
The VGA-IN socket on BeoSystem 2 is for
connection of a HD source, such as a set-top
box, or a PC. Examples of possible setups are
shown below.
BeoVision 4
DVI
SPDIF1
HD STB
L R VIDEO
DVD
V TAPE
V MEM
VGA-IN
PC
DECODER
BeoVision 4
DVI
SPDIF1
HD STB
L R VIDEO
VGA-IN
PC
DECODER
BeoVision 4
DVI
PC
SPDIF3
HD STB
VGA-IN
In the Connections menu:
– Set AV to DVD
– Set V Mem to V Mem
– Set Decoder to PC (VGA)
– Set Camera to STB (DTV/DVI) or
STB (AUX/DVI).
AV
BeoSystem 2
In the Connections menu:
– Set Decoder to PC (VGA)
– Set Camera to STB (DTV/DVI) or
STB (AUX/DVI).
BeoSystem 2
In the Connections menu:
– Set Decoder to STB (DTV/Ypbr) or
STB (AUX/Ypbr)
– Set Camera to PC (DVI).
If you wish to connect a HD set-top box or other
HD source to BeoSystem 2, note that this requires
a special cable, which is available from your
Bang & Olufsen retailer.
BeoSystem 2