Bang & Olufsen BeoVision 4 Reference Book page 20

20
Alternative set-top box connection
If the V.TAPE, AV and DECODER sockets are
all in use, and you want to connect a set-top
box, you can connect the second set-top box
to the close-up socket panel.
Setup
1 Tuning
2 Sound
3 Picture
4 Connections
5 Menu
6 Clock
Camcorder
STB (DTV)
>> Connect a set-top box or decoder
If you connect a set-top box to the close-up
socket panel...
> Press MENU to bring up the main menu.
> Press 3 to bring up the Setup menu.
> Press p to move the cursor down to
Connections.
> Press MENU. Connections changes to
Camcorder.
> Press GO to bring up the Camcorder menu.
> Press m or p to view your options. Select
STB (DTV) or STB (V.AUX). You can, of course,
select Camcorder if you have connected a
Camcorder to the close-up socket panel.
> Press GO.
> When you have registered your set-top box, you
will be asked to select your set-top box type
from an on-screen list. For further information,
refer to the chapter 'Register and use additional
video equipment' on page 32 in the Guide.
> When you have selected your STB type, press
GO to store the settings, or...
> ...press EXIT to leave the menu without storing
S-VHS VIDEO R L
Close-up socket panel.
Gain access to a set-top box connected to the
close-up socket panel...
> If your set-top box is registered as STB (DTV),
press DTV on Beo4.
> If it is registered as STB (V.AUX), press LIST
repeatedly to display V.AUX on Beo4, and then
press GO.
In order to display V.AUX on Beo4, you must first
add it to the Beo4 list of functions. For further
information, refer to the chapter 'Customise Beo4'
on page 32.
PHONES