Bang & Olufsen BeoVision 4 Reference Book page 8

8
Regular maintenance, such as
cleaning, is the responsibility of the
user. To achieve the best result,
follow the instructions to the right.
Contact your Bang & Olufsen retailer
to determine recommendations for
regular maintenance.
NOTE! If the front screen glass should crack or chip,
or if it should be damaged in any way, it must be
replaced immediately, as it could otherwise cause
injury. Please contact your Bang & Olufsen retailer.
Maintenance
Cleaning surfaces...
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a soft, lint-free, firmly wrung cloth,
dipped in a solution of water containing only
a few drops of mild detergent, such as
washing-up liquid. These cleaning
instructions apply to any stand or wall
bracket as well.
About the plasma screen...
Clean only with a dry, soft cloth. Do not use
liquid cleaners or aerosol cleaners.
Do not allow still pictures to be displayed on
the screen for an extended period of time, as
this can cause a permanent after-image to
remain on the screen. Examples of still
pictures are logos, video games, computer
images, and images displayed in 4:3 picture
format.
Cleaning the Beo4 remote control
Wipe the Beo4 remote control with a soft,
lint-free, firmly wrung cloth.
Changing the Beo4 batteries...
When 'BATTERY' appears in the Beo4 display,
it is time to change the batteries in the
remote control.
The Beo4 requires three batteries. Use 1.5
volt (size AAA) Alkaline batteries only.
Replace the batteries as shown on this page.
Keep a finger on top of the batteries until the
lid is replaced.
When you have replaced the batteries, you
must wait for about 10 seconds until 'TV'
appears in the display. The Beo4 remote
control is then ready for use again.
Never use alcohol or other solvents to clean any
part of BeoVision 4!
2
1
3
2
1