Lexmark XM1140 User Manual page 230

Troubleshooting
Load [paper source] with [paper type] [paper size] [paper orientation]
Try one or more of the following:
•
Load the tray or feeder with the correct size and type of paper.
•
To use the tray or feeder that has the correct size and type of paper, select Finished loading paper on the printer
control panel. For non‑touch‑screen printer models, press
Note: If the printer finds a tray that has the correct size and type of paper, then it feeds from that tray. If the
printer cannot find a tray that has the correct size and type of paper, then it prints from the default paper
source.
•
Cancel the current job.
Maintenance kit low [80.xy]
You may need to order a maintenance kit. For more information, contact customer support at
http://support.lexmark.com
continue printing. For non‑touch‑screen printer models, press
Maintenance kit nearly low [80.xy]
For more information, contact customer support at
necessary, select Continue to clear the message and continue printing. For non‑touch‑screen printer models,
press to confirm.
Maintenance kit very low, [x] estimated pages remain [80.xy]
You may need to replace the maintenance kit very soon. For more information, contact customer support at
http://support.lexmark.com
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
Memory full [38]
Try one or more of the following:
• From the printer control panel, select Cancel job to clear the message. For non‑touch‑screen printer models, press
to confirm.
• Install additional printer memory.
Memory full, cannot print faxes
From the printer control panel, select Continue to clear the message without printing. For non‑touch‑screen printer
models, press to confirm.
Note: Held faxes will attempt to print after the printer restarts.
or your service representative. If necessary, select Continue to clear the message and
http://support.lexmark.com
or your service representative.
to confirm.
to confirm.
to confirm.
or your service representative. If
230