Partial Document Or Photo Copies; Poor Copy Quality - Lexmark XM1140 User Manual

Troubleshooting

Partial document or photo copies

Action
Step 1
Check the placement of the document or photo.
Make sure the document or photo is loaded facedown on the scanner
glass in the upper left corner.
Is the document or photo loaded correctly?
Step 2
Check if the paper size setting matches the size of the paper loaded in the
tray.
From the Paper menu on the printer control panel, check the Paper
Size setting.
Does the paper size setting match the size of the paper loaded in the tray.
Step 3
a
Specify the paper size. Depending on your operating system, specify
the paper size in Printing Preferences or the Print dialog.
b
Resend the print job.
Do copies print properly?

Poor copy quality

Action
Step 1
Check if an error or status message appears on the display.
Does an error or status message appear?
Step 2
Check the quality of the original document.
Is the quality of the original document satisfactory?
Step 3
If dark marks appear on prints, then clean the scanner glass and the ADF
glass using a clean, lint-free cloth dampened with water.
Is the scanner glass clean?
Yes No
Go to step 2. Place the document or
photo facedown on the
scanner glass in the
upper left corner.
Go to step 3. Change the paper size
setting to match the
paper loaded in the
tray, or load the tray
with paper that
matches the paper size
setting.
The problem is solved. Contact
support.
Yes No
Clear the error or status Go to step 2.
message.
Go to step 3. Increase the scan
resolution setting for a
higher‑quality output.
Go to step 4. See "Cleaning the
scanner glass" on
page 199.
271
customer