Copy Settings Menu - Lexmark XM1140 User Manual

Understanding the printer menus

Copy Settings menu

Use
Content Type
Text
Graphics
Text/Photo
Photo
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Sides (Duplex)
1 sided to 1 sided
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Paper Saver
Off
2‑up Portrait
4‑up Portrait
2‑up Landscape
4‑up Landscape
Print Page Borders
On
Off
Collate
1,1,1 ‑ 2,2,2
1,2,3 ‑ 1,2,3
To
Specify the content of the original document.
Note: Text/Photo is the factory default setting.
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Specify whether an original document is two‑sided (duplex) or one‑sided, and then
specify whether the copy should be two‑sided or one‑sided.
Notes:
•
1 sided to 1 sided—The original document has print on one side and the copy
will also have print on one side.
•
1 sided to 2 sided—The original document has print on one side, while the
copy will have print on both sides.
•
2 sided to 1 sided—The original document has print on both sides, while the
copy will have print on just one side.
•
2 sided to 2 sided—The original document has print on both sides, and the
copy will also have print on both sides.
Copy two or four sheets of a document on one page.
Note: Off is the factory default setting.
Specify whether or not a border is printed.
Note: Off is the factory default setting.
Keep the pages of a print job stacked in sequence when printing multiple copies.
Note: "1,2,3 ‑ 1,2,3" is the factory default setting.
153