Lexmark XM1140 User Manual page 175

Understanding the printer menus
Use
Background Removal
‑4 to 4
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Fix Scan Skew
Auto
Off
On
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Print Settings menu items and their descriptions
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Collate
1,1,1 ‑ 2,2,2
1,2,3 ‑ 1,2,3
To
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Specify the contrast of the scanned image.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Specify whether or not to fix slight skew on the scanned image.
Notes:
•
Off is the factory default setting
•
This menu item appears only in select printer models.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default while "warm" values generate a redder output than the
default.
Note: 0 is the factory default setting.
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "1,2,3 ‑ 1,2,3" is the factory default setting.
175